{
  "schemaVersion": "sansheng-article-data-v3",
  "contentPolicy": "The canonical HTML article is the source of truth. This file is generated from it and adds no independent claims or instructions.",
  "status": "publish",
  "wordpressPostId": 32233,
  "title": "Airlaid Napkin Supplier: Set Folded Pack Height Limits",
  "slug": "airlaid-napkin-supplier-folded-pack-height",
  "canonicalHtml": "https://tissuepapersupplier.com/airlaid-napkin-supplier-folded-pack-height/",
  "description": "Define a finished airlaid-napkin pack-height window under a stated pack count and measurement method before hotel or retail orders.",
  "language": "en-US",
  "author": {
    "name": "Tracy Zhang",
    "url": "https://tissuepapersupplier.com/tracy/"
  },
  "publisher": {
    "name": "Weifang Sansheng Paper Co., Ltd.",
    "url": "https://tissuepapersupplier.com/"
  },
  "dates": {
    "published": "2026-11-18T09:26:15Z",
    "modified": "2026-11-17T09:26:20Z"
  },
  "directAnswer": "",
  "sections": [
    {
      "id": "direct-answer",
      "heading": "Direct answer",
      "content": [
        "An airlaid napkin supplier should measure finished pack height with the specified sheet count, fold format, sleeve and a repeatable compression or no-load method. Compare identified packs from the run with the buyer’s carton and dispenser allowance. A loose napkin caliper reading does not predict the thickness of a packed stack, and pack height by itself does not measure fold recovery."
      ]
    },
    {
      "id": "fix-what-counts-as-one-pack",
      "heading": "Fix what counts as one pack",
      "content": [
        "State sheet count, open and folded dimensions, ply or material construction, sleeve type and whether the pack is measured before or after case compression. Record whether the carton contains individually wrapped stacks or loose bundles. Without a fixed configuration, suppliers may quote different pack heights for the same nominal napkin. Retain one fully packed reference with its artwork and lot identification."
      ]
    },
    {
      "id": "use-one-height-measurement-method",
      "heading": "Use one height measurement method",
      "content": [
        "Specify a flat support, the contact plate or measuring device, any applied load, dwell time and conditioning. Measure at defined points rather than pressing the tallest corner by hand. Record individual packs from the start, middle and end of production, and keep the result with pack count. ISO tissue thickness guidance concerns specimen measurement under defined pressure; it does not supply a finished airlaid pack-height limit."
      ]
    },
    {
      "id": "check-the-carton-and-dispensing-consequence",
      "heading": "Check the carton and dispensing consequence",
      "content": [
        "Place packs at the target case count and verify closure, case bulge and pallet stacking clearance. For foodservice use, confirm that a pack can be removed and opened without crushing its folded edges. A low pack height may reflect undercounting, a different fold or excessive compression; a high pack may point to trapped air or changing folds. Investigate the cause before adjusting the carton size."
      ]
    },
    {
      "id": "write-a-repeatable-acceptance-window",
      "heading": "Write a repeatable acceptance window",
      "content": [
        "Use the signed pack sample and actual customer shelf or dispenser space to set minimum and maximum height. State the sample plan and what happens when a pack misses the range. Keep fold recovery, emboss and sheet separation as separate tests. On repeat orders, compare the first article with the approved pack and record any change in sleeve, fold or sheet count before releasing production."
      ]
    },
    {
      "id": "buyer-comparison-record",
      "heading": "Buyer comparison record",
      "content": [
        "Check",
        "Record",
        "Buyer purpose",
        "Configuration",
        "Count, fold and sleeve",
        "Makes packs comparable",
        "Method",
        "Plate, load and dwell",
        "Controls measurement",
        "Fit",
        "Case and dispensing check",
        "Shows buyer consequence",
        "Release",
        "Height window and plan",
        "Controls repeat orders"
      ]
    },
    {
      "id": "factory-evidence",
      "heading": "Sansheng product evidence and its limits",
      "content": [
        "The linked Sansheng page identifies the relevant product family. Reused site images illustrate product formats; they do not document the proposed test, certification, shipment or performance result. No identified Sansheng lot record was supplied for this article. Request an exact SKU sample and supporting records before approving an order."
      ]
    },
    {
      "id": "what-should-buyers-ask-the-airlaid-napkin-supplier",
      "heading": "What should buyers ask the airlaid napkin supplier?",
      "content": [
        "Approved napkin fold and pack-count drawing",
        "Height method, conditioning and acceptance window",
        "Case count, carton dimensions and target dispenser",
        "First-article and repeat-lot sample plan",
        "Send the airlaid napkin supplier your intended use, destination and required acceptance decision.",
        "Airlaid Napkin Manufacturer: Does the Fold Recover After Packing?",
        "Airlaid Napkin Supplier: How to Check Cut-Edge Fraying After Folding?",
        "Airlaid Napkin Supplier: How to Check Logo Placement After Folding?"
      ]
    },
    {
      "id": "questions-buyers-also-ask",
      "heading": "Questions buyers also ask",
      "content": [
        "No. Measure the finished counted and sleeved stack.",
        "No. Test fold recovery separately under its own method.",
        "No. Set it from the buyer’s carton and use requirements."
      ]
    },
    {
      "id": "sources-and-scope-notes",
      "heading": "Sources and scope notes",
      "content": [
        "EDANA Nonwovens Standard Procedures catalogue Supports: Identifies harmonized nonwoven sampling and test procedures. Limit: It does not define a folded airlaid-napkin pack-height tolerance.",
        "Sansheng airlaid napkin product page Supports: Identifies the relevant Sansheng product family and supply context. Limit: It does not document a tested lot, approved tolerance or a production result.",
        "Source scope checked November 16, 2026. Illustrative images do not document a Sansheng test, certified SKU or customer order."
      ]
    },
    {
      "id": "request-an-identified-sample-review",
      "heading": "Request an identified sample review",
      "content": [
        "Send the airlaid napkin supplier your exact SKU, approved sample, destination and evidence requirement. Match the available record to your buying decision before a quote or release."
      ]
    }
  ],
  "images": [
    {
      "role": "featured",
      "url": "https://tissuepapersupplier.com/wp-content/uploads/2026/10/ss-20261009-b2-airlaid-napkin-supplier-emboss-featured.jpg",
      "alt": "Airlaid napkin supplier comparison of two folded white embossed dinner napkins on an inspection table",
      "caption": "Illustrative image: Folded airlaid napkins and counted stack. Existing site media shows product context, not a test or identified lot result.",
      "illustrative": true
    },
    {
      "role": "body-1",
      "url": "https://tissuepapersupplier.com/wp-content/uploads/2026/08/airlaid-napkin-manufacturer-fold-recovery-02.jpg",
      "alt": "Folded airlaid napkin stack being checked beside a metal ruler",
      "caption": "Illustrative image: Napkin stack side view for height measurement. Existing site media shows product context, not a test or identified lot result.",
      "illustrative": true
    },
    {
      "role": "body-2",
      "url": "https://tissuepapersupplier.com/wp-content/uploads/2026/08/airlaid-napkin-manufacturer-fold-recovery-03.jpg",
      "alt": "Three wrapped airlaid napkin stacks with different pack compression",
      "caption": "Illustrative image: Packed napkins and case fit context. Existing site media shows product context, not a test or identified lot result.",
      "illustrative": true
    },
    {
      "role": "body-3",
      "url": "https://tissuepapersupplier.com/wp-content/uploads/2026/08/airlaid-napkin-manufacturer-fold-recovery-01.jpg",
      "alt": "Wrapped airlaid napkin stack beside an opened white sample",
      "caption": "Illustrative image: Retained pack for repeat-order comparison. Existing site media shows product context, not a test or identified lot result.",
      "illustrative": true
    }
  ],
  "sources": [],
  "sourceScopeNote": "",
  "conversion": {
    "heading": "",
    "nextStep": "",
    "label": "Send Your RFQ",
    "url": "https://tissuepapersupplier.com/contact-tissue-paper-supplier/"
  },
  "alternateFormats": {
    "json": "https://tissuepapersupplier.com/ai-article-packages/airlaid-napkin-supplier-folded-pack-height.json",
    "markdown": "https://tissuepapersupplier.com/ai-article-packages/airlaid-napkin-supplier-folded-pack-height.md"
  }
}
