{ "schemaVersion": "sansheng-ai-article-package-v2", "templateVersion": "Sansheng B2B Blog Template — GEO & SEO V2.1", "status": "draft", "wordpressPostId": 21089, "number": 5, "title": "How to Source Airlaid Paper Rolls from China", "slug": "airlaid-paper-rolls-from-china", "canonicalUrl": "https://tissuepapersupplier.com/airlaid-paper-rolls-from-china/", "seoTitle": "Airlaid Paper Rolls from China: Sourcing Checklist", "seoDescription": "Source airlaid paper rolls from China by specifying GSM, width, diameter, core, winding, splices, trial rolls, packing and usable yield.", "primaryKeyword": "airlaid paper rolls from China", "focusKeywords": [ "airlaid paper rolls from China", "airlaid jumbo rolls supplier", "airlaid paper roll wholesale", "airlaid roll width and diameter", "airlaid paper roll core", "airlaid roll container loading", "airlaid roll converting trial", "airlaid paper roll MOQ", "airlaid roll RFQ" ], "author": "Tracy Zhang", "reviewedBy": "Tracy Zhang", "authorExperience": "20 years of tissue paper export experience", "datePublished": "2026-07-21", "dateModified": "2026-07-21", "audience": "European and North American importers, converters, distributors, private-label buyers, hotel operators, quality teams, and procurement teams", "directAnswer": "Source rolls by starting with the converter's unwind and finished-product requirements, then specifying material construction, basis weight, web width, diameter, mass, core, winding direction, splice policy, edge condition, roll identification, wrapping, restraints, and trial acceptance. Compare landed cost per usable square metre after trim, splice, setup, damage, and process waste. Final MOQ, loading, freight, and schedule depend on roll geometry, equipment, order mix, packing, and current production conditions.", "internalLinks": [ { "id": "airlaid-roll-audit", "url": "https://tissuepapersupplier.com/airlaid-paper-factory-north-america/", "anchor": "airlaid paper factory audit guide" }, { "id": "airlaid-horeca", "url": "https://tissuepapersupplier.com/airlaid-paper-supplier-horeca/", "anchor": "airlaid paper sourcing for HoReCa" }, { "id": "airlaid-manufacturer", "url": "https://tissuepapersupplier.com/airlaid-napkins-manufacturer/", "anchor": "airlaid napkins manufacturer program" }, { "id": "contact", "url": "https://tissuepapersupplier.com/contact-tissue-paper-supplier/", "anchor": "send Sansheng a same-spec RFQ" } ], "authorityLinks": [ { "id": "edana-nwsp", "publisher": "EDANA", "url": "https://www.edana.org/knowledge-hub/resources/publications/nonwovens-standard-procedures", "sourceRole": "Primary industry-association reference for harmonised nonwoven structure and performance test procedures", "supportStatus": "Supports method-controlled descriptions and comparison of nonwoven properties", "scopeNote": "It does not certify a supplier, product, sample, batch, test report, or shipment and does not establish which method is legally required for a destination market.", "retrievedDate": "2026-07-21" }, { "id": "iso-paper-board-catalogue", "publisher": "International Organization for Standardization", "url": "https://www.iso.org/committee/45694/x/catalogue/", "sourceRole": "Primary standards catalogue for paper and board sampling, conditioning, grammage, strength, absorption, and related method references", "supportStatus": "Supports identification of current, withdrawn, and developing method references", "scopeNote": "It does not certify a Sansheng facility, airlaid roll, napkin, laboratory result, approved sample, or shipment.", "retrievedDate": "2026-07-21" } ], "featuredImage": { "role": "featured", "filename": "05-airlaid-paper-rolls-from-china-featured.webp", "width": 1200, "height": 675, "maxBytes": 300000, "alt": "Airlaid paper rolls staged at a converter receiving area", "caption": "Roll sourcing should begin with the converter's unwind, core, width, diameter, and trial requirements.", "placement": "wordpress-featured-media", "workerPresent": true }, "images": [ { "role": "body-1", "filename": "05-airlaid-paper-rolls-from-china-body-1.webp", "width": 900, "height": 650, "maxBytes": 300000, "alt": "airlaid paper rolls from China", "caption": "Roll face, edge, core, and fibre texture provide visible checks before a converting trial.", "placement": "body-after-quick-decision", "workerPresent": false }, { "role": "body-2", "filename": "05-airlaid-paper-rolls-from-china-body-2.webp", "width": 900, "height": 650, "maxBytes": 300000, "alt": "Airlaid roll width diameter core measurement", "caption": "Use agreed measuring points and tolerances for width, diameter, and core fit.", "placement": "body-after-comparison", "workerPresent": true }, { "role": "body-3", "filename": "05-airlaid-paper-rolls-from-china-body-3.webp", "width": 900, "height": 650, "maxBytes": 300000, "alt": "Airlaid paper controlled unwind and converting trial", "caption": "A same-spec trial confirms web handling, splice behaviour, and finished-product suitability.", "placement": "body-after-rfq", "workerPresent": true }, { "role": "body-4", "filename": "05-airlaid-paper-rolls-from-china-body-4.webp", "width": 900, "height": 650, "maxBytes": 300000, "alt": "Wrapped airlaid paper rolls on protected industrial cradles", "caption": "Transit protection should prevent crushed cores, edge damage, moisture exposure, and loss of roundness.", "placement": "body-before-final-cta", "workerPresent": false } ], "faq": [ { "question": "Should rolls be compared by price per tonne?", "answer": "Not alone. Compare the same construction and performance, then calculate landed cost per usable square metre and per approved finished unit after trim, setup, splice, damage, and process waste." }, { "question": "What core information is required?", "answer": "Specify inside diameter, wall thickness, material, strength, straightness, length, end condition, chuck or shaft fit, plugs, protection, and acceptable measurement tolerance." }, { "question": "Are splice-free rolls always required?", "answer": "That depends on converter economics and equipment. Define maximum count, type, strength, marking, position, minimum spacing, detection, records, and disposition rather than assuming one universal policy." }, { "question": "How should trial waste be recorded?", "answer": "Separate setup, trim, splice, break, defect, damaged edge, partial roll, machine, and operator-related waste so the decision reflects identifiable causes and usable yield." }, { "question": "Can a supplier guarantee container quantity early?", "answer": "A reliable estimate requires final roll diameter, width, mass, orientation, wrap, cradles or pallets, restraints, payload, cube, and approved loading pattern. Keep it conditional until then." }, { "question": "What must be checked on a repeat roll order?", "answer": "Confirm the approved specification and trial basis, review prior yield and deviations, obtain change status, update commercial and logistics inputs, and verify current roll and batch records." } ], "decisionTable": { "headers": [ "Decision field", "Required input", "Buyer purpose", "Acceptance evidence" ], "rows": [ [ "Machine interface", "Unwind, shaft or chuck, brakes, sensors and clearances", "Defines physical fit", "Machine drawing and trial" ], [ "Web", "Construction, basis weight, width and properties", "Determines finished performance", "Controlled specification" ], [ "Roll", "Diameter, mass, core, orientation and winding", "Controls handling and runnability", "Receiving measurements" ], [ "Splice", "Count, type, strength, marking and position", "Affects stops and waste", "Splice record" ], [ "Edges", "Trim quality, damage, wrinkles and contamination", "Affects usable width", "Roll-face acceptance" ], [ "Trial", "Quantity, settings, duration, waste and finished checks", "Tests real conversion", "Signed trial report" ], [ "Packing", "Wrap, plugs, cradle, pallet and restraint", "Preserves roll condition", "Approved loading plan" ], [ "Yield", "Usable area, trim, splice, setup and damage allowances", "Supports true cost", "Buyer calculation" ], [ "Traceability", "Roll, lot, test, packing and shipment IDs", "Supports repeat orders", "Reconciled record" ] ] }, "rfqTable": { "headers": [ "RFQ item", "What to request", "Why it matters" ], "rows": [ [ "Machine", "Unwind, shaft or chuck, maximum diameter and mass, width range and controls", "Defines fit" ], [ "Finished product", "Format, conversion steps, performance and packing", "Sets functional target" ], [ "Web", "Construction, basis weight, properties, methods and tolerances", "Defines supplied material" ], [ "Geometry", "Width, diameter, net mass, core and winding direction", "Controls handling and runnability" ], [ "Splices and edges", "Limits, marking, location, trim and defect criteria", "Controls waste and stops" ], [ "Trial", "Quantity, roll selection, conditions, data and acceptance", "Qualifies the program" ], [ "Packing", "Wrap, plugs, cradles, pallet, restraints and storage", "Protects transit condition" ], [ "Commercial", "MOQ by width, price unit, payment, Incoterm and schedule", "Normalizes offers" ], [ "Traceability", "Roll, lot, test, packing, shipment and change notice", "Supports repeat control" ] ] }, "checklist": [ "Freeze the exact commercial SKU and intended end use.", "Name every test method and conditioning rule used for acceptance.", "Link the approved sample to a unique retained reference.", "Define tolerances rather than accepting nominal values alone.", "Record the producing site and the scope of every external claim.", "Require written notice before a material or process change.", "Agree the trial quantity and the decision owner before production.", "Verify packing, labeling, and loading data against the RFQ.", "Separate product evidence from transaction and shipment evidence.", "Confirm Incoterm, destination port, and importer responsibilities.", "Keep pre-shipment acceptance tied to the signed specification.", "Retain the approval file for repeat-order and claim review." ], "cta": { "popupId": 13776, "fallbackUrl": "https://tissuepapersupplier.com/contact-tissue-paper-supplier/", "email": "Tracy@tissuepapersupplier.com", "whatsapp": "+86-15762683071" } }