---
title: "Airlaid Paper Supplier: How to Control Slit-Edge Lint?"
canonical_url: "https://tissuepapersupplier.com/airlaid-paper-supplier-slit-edge-lint/"
author: "Tracy Zhang"
publisher: "Weifang Sansheng Paper Co., Ltd."
language: "en-US"
status: "publish"
modified: "2026-10-13T01:58:31Z"
source_of_truth: "canonical HTML"
---

# Airlaid Paper Supplier: How to Control Slit-Edge Lint?

**B2B procurement · Specification review**

An airlaid paper supplier should define slit-edge lint on the finished parent roll, not rely on a clean flat sample. Compare an identified reference roll with the proposed lot under the same unwind speed, web path and collection method. Record loose fibers at both edges and whether they cause dust buildup or rejectable pieces in the buyer's converting process.

This is an incoming-quality and converting-trial decision. It does not claim a Sansheng roll has passed a lint test or prescribe one universal lint limit for all airlaid constructions.

By [Tracy Zhang](https://tissuepapersupplier.com/tracy/) · For converters, airlaid product brands and purchasing teams · Prepared October 12, 2026

Send the current specification, identified sample and the decision you need to make.

[Request a Same-Spec Review](https://tissuepapersupplier.com/contact-tissue-paper-supplier/) [WhatsApp +86 157 6268 3071](https://wa.me/8615762683071) [Review the relevant Sansheng product program](https://tissuepapersupplier.com/airlaid-paper-manufacturer-binder/) **Reusable procurement data**

- [JSON article package](https://tissuepapersupplier.com/ai-article-packages/airlaid-paper-supplier-slit-edge-lint.json)

- [Markdown article file](https://tissuepapersupplier.com/ai-article-packages/airlaid-paper-supplier-slit-edge-lint.md)

![Airlaid paper supplier sample roll with white sheet at an unwind stand](https://tissuepapersupplier.com/wp-content/uploads/2026/08/airlaid-paper-supplier-edge-curl-01.jpg)

*Illustrative image: Wide white airlaid paper parent roll on a converter unwind stand with one realistically curled web edge.*

## What should the buyer approve first?

An airlaid paper supplier should define slit-edge lint on the finished parent roll, not rely on a clean flat sample. Compare an identified reference roll with the proposed lot under the same unwind speed, web path and collection method. Record loose fibers at both edges and whether they cause dust buildup or rejectable pieces in the buyer's converting process.

For airlaid paper supplier comparisons, approve the named sample and its actual use conditions before a bulk order.

## Airlaid Paper Supplier: Define the defect before choosing a test

Buyers should separate a visibly ragged slit edge from fibers released during handling. Photograph the edge, note the roll side and distance from the core, then agree whether the concern is loose fiber at receipt, airborne lint during conversion or contamination on finished pieces. These are related observations, not interchangeable measurements.

Ask the airlaid paper supplier to identify the finished roll width, bonding route, basis weight, slit method, core and wrap. A change in any of these may affect edge behavior. Specify where the buyer will inspect: the outer wraps, a middle position and material nearer the core. One perfect cut from the roll end cannot represent the full delivery.

![airlaid paper supplier — close-up side view of an airlaid paper web edge lifting slightly above a flat stainless reference](https://tissuepapersupplier.com/wp-content/uploads/2026/08/airlaid-paper-supplier-edge-curl-02.jpg)

*Illustrative image: Close-up side view of an airlaid paper web edge lifting slightly above a flat stainless reference surface.*

## Use a comparable roll-to-roll review

Set the same conditioning, handling, unwind direction and speed for an approved reference and a candidate roll. Place a clean collector or agreed observation surface near the edge, and document the collection interval. Do not compare photographs taken under different lighting or after different amounts of handling as if they were quantitative test results.

ISO 9073-10 describes dry-state lint and particle generation for nonwovens. Its existence is useful when discussing a method, but the buyer and laboratory must first decide whether that method is suitable for this airlaid construction and the failure mode at the slit edge. It does not set a pass limit for a Sansheng SKU.

![airlaid paper supplier — clean converting line showing web guides and a white airlaid sheet tracking through rollers without](https://tissuepapersupplier.com/wp-content/uploads/2026/08/airlaid-paper-supplier-edge-curl-03.jpg)

*Illustrative image: Clean converting line showing web guides and a white airlaid sheet tracking through rollers without logos.*

## Connect a lint result to the converter's process

A laboratory specimen can miss what happens at guides, vacuum points and cutting stations. Run an identified trial with the actual web path, record edge position and note any buildup, machine stops or rejects. Keep finished pieces from the trial alongside the parent-roll ID so the purchasing decision is tied to the material that was tested.

A buyer may accept a visually imperfect edge if the agreed application trial shows no relevant loss, or reject a tidy-looking roll that sheds during unwinding. State that decision in the specification rather than leaving 'low lint' as an undefined adjective.

![airlaid paper supplier — Chinese adult technician in hairnet checking roll edge condition with a straightedge at a converting](https://tissuepapersupplier.com/wp-content/uploads/2026/08/airlaid-paper-supplier-edge-curl-04.jpg)

*Illustrative image: Chinese adult technician in hairnet checking roll edge condition with a straightedge at a converting workstation.*

## Write the release rule into the RFQ

Ask for edge photographs, sampling positions, the agreed evaluation method, reference sample ID and a converter-trial record. Define whether a failed edge requires segregation, re-slitting or a new roll sample. A supplier should not silently change the slit or wrap process after approval.

For repeat orders, compare the same material and machine conditions. If the converting line or product use changes, reopen the trial instead of treating the first approval as permanent evidence.

## The buyer's comparison record

| Record level | Fields to confirm | Buyer purpose |
| --- | --- | --- |
| Finished edge | Both sides and several roll positions | Avoid approving only the neat outer wrap |
| Method | Conditioning, handling and collection interval | Make two rolls comparable |
| Converter trial | Web path, speed, buildup and rejected pieces | Tie the result to actual use |

## Sansheng product evidence and its limits

Sansheng's airlaid paper product program describes parent rolls and converter-specified width, basis weight and packing. This supports asking for a roll-level specification. It is not a batch-specific lint result; a buyer must request an identified sample and trial record.

## What belongs in the RFQ?

Ask the airlaid paper supplier to respond against one identified product and a written acceptance decision.

- State finished use, bonding route if known, GSM, width, core and roll size.

- Describe the edge defect and provide an approved reference roll or images.

- Agree sampling positions, dry-lint method suitability and converter-trial conditions.

- Name the release decision, retained sample and change-control trigger.

For adjacent decisions, read [the related Sansheng purchasing guide](https://tissuepapersupplier.com/airlaid-paper-supplier-edge-curl/) and [the companion specification check](https://tissuepapersupplier.com/airlaid-paper-roll-tolerances/). Keep each approval question separate.

## Questions buyers also ask

### Can a hand-cut sample approve the slit edge?

No. Inspect material from an identified production roll and run a relevant converter trial.

### Does ISO 9073-10 set a universal airlaid edge limit?

No. It describes a method; suitability and acceptance limits must be agreed for the material and end use.

### Should a buyer reject every visible fiber?

Not automatically. Define which observation affects the finished application and document the decision.

## Sources and scope notes

- [ISO 9073-10: dry-state lint and particles](https://committee.iso.org/standard/30167.html) **Supports:** Identifies a nonwoven dry-lint test method. **Limit:** Method applicability and pass limits for an airlaid slit edge require separate agreement.

- [Sansheng airlaid paper product program](https://tissuepapersupplier.com/airlaid-paper-manufacturer-binder/) **Supports:** Describes the supplied airlaid paper program. **Limit:** Not a lot-specific edge-lint report.

Sources checked October 12, 2026. Images are illustrative and do not document a Sansheng test, customer order or shipment.

## Request a same-spec review

Send the roll construction, slit width, converter speed and an example of the edge concern. Sansheng can review the same-spec sample and identify the evidence still needed before bulk approval.

[Request a Same-Spec Review](https://tissuepapersupplier.com/contact-tissue-paper-supplier/) [WhatsApp +86 157 6268 3071](https://wa.me/8615762683071)

> This Markdown file is generated from the canonical HTML article and is not an independent source.
