{
  "schemaVersion": "sansheng-article-data-v3",
  "contentPolicy": "The canonical HTML article is the source of truth. This file is generated from it and adds no independent claims or instructions.",
  "status": "publish",
  "wordpressPostId": 28370,
  "title": "Facial Tissue Supplier: How to Test Pop-Up Sheet Handoff?",
  "slug": "facial-tissue-supplier-sheet-handoff",
  "canonicalHtml": "https://tissuepapersupplier.com/facial-tissue-supplier-sheet-handoff/",
  "description": "Ask a facial tissue supplier to test whether each sheet presents the next one across a box, using the final slit, fold, pack count and handling rules.",
  "language": "en-US",
  "author": {
    "name": "Tracy Zhang",
    "url": "https://tissuepapersupplier.com/tracy/"
  },
  "publisher": {
    "name": "Weifang Sansheng Paper Co., Ltd.",
    "url": "https://tissuepapersupplier.com/"
  },
  "dates": {
    "published": "2026-11-01T23:58:00Z",
    "modified": "2026-10-10T02:16:29Z"
  },
  "directAnswer": "",
  "sections": [
    {
      "id": "what-should-the-buyer-approve-first",
      "heading": "What should the buyer approve first?",
      "content": [
        "A facial tissue supplier should test sheet-to-sheet handoff on the finished box through the beginning, middle and end of use. After each ordinary pull, record whether exactly one sheet separates and whether the next sheet remains reachable at the slit. Keep the same tissue construction, interleaving, box opening and packing pressure as the approved sample. The first-sheet opening-force test is a different decision; neither alone proves reliable use of the full box."
      ]
    },
    {
      "id": "facial-tissue-supplier-distinguish-the-first-pull-from-later-handoffs",
      "heading": "Facial Tissue Supplier: Distinguish the first pull from later handoffs",
      "content": [
        "A facial tissue supplier can pass a first-sheet pull check while the next sheet repeatedly falls back into the box. First-sheet opening examines the initial access condition. Handoff examines what remains after ordinary use has begun. They should be logged separately because the box slit, film insert, tissue fold and interleaving overlap can influence both in different ways. Ask for a production box rather than a hand-packed display sample.",
        "With a facial tissue supplier, define what the user should see after a pull: one sheet released, the following sheet accessible, no large bundle dragged out and no torn sheet left across the opening. These are observable outcomes. The buyer may choose a protrusion window for its own package, but this article does not supply one universal millimeter target. A retail box, a clinic amenity box and a dispenser sleeve may need different acceptance criteria.",
        "Give each candidate an identified SKU and box revision. A slit change or stiffer carton can alter the behavior even when the tissue itself is unchanged. Conversely, a new ply construction may alter friction and stiffness in an unchanged box. The facial tissue supplier should freeze both components for the trial and tell the buyer what can vary at production scale."
      ]
    },
    {
      "id": "how-should-a-facial-tissue-supplier-sample-a-full-box",
      "heading": "How should a facial tissue supplier sample a full box?",
      "content": [
        "Select finished boxes from identified cartons and more than one packing position. Note carton condition, box seal, tissue count, fold, ply and any visible compression before opening. Photograph the first-sheet state, then use a fixed handling direction and pull speed that resembles normal use. Do not pull vertically for one supplier and diagonally for another; the result would mix product effects with operator behavior.",
        "Ask the facial tissue supplier to record a sequence near the start, middle and end of the box. A full box may be over-compressed; a nearly empty box may have less support beneath the next sheet. Keep the count of successful single-sheet pulls, double pulls, fall-backs and tears for each stage. If a sheet falls back, mark the event without correcting the box and silently calling the next pull normal. Note any tap, shake or finger retrieval that was needed to continue.",
        "When two candidates differ, inspect the box slit and tissue interleave before changing one component. A wider opening may reduce snagging but can also let multiple sheets escape. A tighter opening may retain the next sheet yet increase pull damage. Test only one controlled revision at a time against the same approved reference, otherwise the cause of improvement is unclear."
      ]
    },
    {
      "id": "use-lab-properties-as-context-not-a-substitute",
      "heading": "Use lab properties as context, not a substitute",
      "content": [
        "ISO 12625-4 measures dry tensile properties of tissue. That report can help distinguish a weak sheet from a high-resistance box opening when tearing occurs, provided sample identity and test conditions match. It does not prescribe a pass rate for interleaved boxed tissue. A strong sheet can still double-pull, and a gentle pull force can still allow the next sheet to disappear into the carton.",
        "ISO 12625-3 covers thickness and bulk. A construction change that alters sheet bulk may affect the number of sheets that fit and the pressure near the slit, but the caliper result does not predict handoff by itself. Pair a method-controlled material report with the finished-box trial rather than converting a single number into an unsupported dispensing claim.",
        "A facial tissue supplier video can illustrate the failure mode, but it should not replace the written count record. Identify the box, lot, start and end positions, operator and protocol. A short clip of ten successful pulls from a favorable box is not evidence for the entire shipment. If the procurement contract needs statistical confidence, the buyer's quality team must choose an appropriate sampling plan before release."
      ]
    },
    {
      "id": "write-an-acceptance-and-change-control-record",
      "heading": "Write an acceptance and change-control record",
      "content": [
        "The facial tissue supplier should state how many boxes were examined, which failures occurred, and whether the comparison met the agreed reference. Record both functional outcomes and visible presentation: a sheet that can be retrieved only with fingers is not the same as a clean pop-up handoff. Decide in advance which events trigger a hold, investigation or revised sample.",
        "The facial tissue supplier and buyer should keep the approved tissue stack and printed box version together. Changing the die-cut slit, film window, sheet size, fold overlap, ply or pack count can invalidate the earlier handoff check. If the buyer requests lower case cost by compressing more boxes into a carton, test the unpacked boxes after representative transit handling as well as at the factory table.",
        "Put the handoff question into the quotation so competing offers use one construction. Price per box is not a meaningful comparison if one supplier quotes fewer sheets or a looser, larger carton. A passing first production trial should be retained as a reference, not described as proof that future lots will automatically meet the same outcome."
      ]
    },
    {
      "id": "the-buyer-s-comparison-record",
      "heading": "The buyer's comparison record",
      "content": [
        "Review point",
        "Record",
        "Buyer purpose",
        "Start",
        "First sheet and next-sheet presentation",
        "Separate opening access from handoff",
        "Middle",
        "Single pulls, double pulls, fall-backs and tears",
        "Find interleaving failures in normal use",
        "End",
        "Same outcomes with a low remaining stack",
        "Check loss of support near the final sheets",
        "Change review",
        "Slit, fold, ply, count, box and compression revision",
        "Know when approval needs repeating"
      ]
    },
    {
      "id": "sansheng-product-evidence-and-its-limits",
      "heading": "Sansheng product evidence and its limits",
      "content": [
        "Sansheng's facial-tissue product page describes box and soft-pack formats, sheet or pack choices and OEM packaging. Those published options show why the finished box and sheet stack should be specified together. They are not a Sansheng handoff trial, a measured success rate or a guarantee for a buyer's particular carton."
      ]
    },
    {
      "id": "what-belongs-in-the-rfq",
      "heading": "What belongs in the RFQ?",
      "content": [
        "Provide the finished box drawing, slit or film-window version and physical sample.",
        "Specify tissue size, ply, fold, interleaving and sheets per box.",
        "Agree pull direction, start/middle/end observations and failure categories.",
        "Require lot-linked records and reapproval after any box or tissue-stack change.",
        "For adjacent decisions, read the related purchasing guide and the companion specification check . Keep each approval question separate."
      ]
    },
    {
      "id": "questions-buyers-also-ask",
      "heading": "Questions buyers also ask",
      "content": [
        "No. It addresses initial access; the buyer should also review sheet-to-sheet handoff across the remaining stack.",
        "Not necessarily. It may ease one problem while increasing double pulls or fall-back. Compare the finished constructions.",
        "No. Tensile data characterize the sheet under a defined method; the finished box and interleaving determine the dispensing experience."
      ]
    },
    {
      "id": "sources-and-scope-notes",
      "heading": "Sources and scope notes",
      "content": [
        "ISO 12625-4:2022 — tissue tensile properties Supports: Defines dry tensile, stretch and tensile-energy measurements for tissue. Limit: Does not measure box handoff or prescribe a dispensing pass rate.",
        "ISO 12625-3:2014 — tissue thickness and bulk Supports: Defines tissue thickness and bulk measurement. Limit: Caliper cannot approve interleaving or the final box opening by itself.",
        "Sources checked October 9, 2026. Images are illustrative and do not document a Sansheng test, customer order, factory operation or shipment."
      ]
    },
    {
      "id": "request-a-same-spec-review",
      "heading": "Request a same-spec review",
      "content": [
        "Send the approved box, tissue stack details and a short record of the failure you see. Sansheng can compare the same specification for a facial tissue supplier RFQ; acceptance must be agreed from the actual finished-box trial."
      ]
    }
  ],
  "images": [
    {
      "role": "featured",
      "url": "https://tissuepapersupplier.com/wp-content/uploads/2026/10/ss-20261009-facial-tissue-supplier-sheet-handoff-featured.webp",
      "alt": "Facial tissue supplier boxed samples with one sheet raised and the next interleaved sheet visible",
      "caption": "Illustrative image: A box handoff test follows the next sheet, not only the first pull.",
      "illustrative": true
    },
    {
      "role": "body-1",
      "url": "https://tissuepapersupplier.com/wp-content/uploads/2026/08/box-tissue-manufacturer-first-sheet-pull-01-1.jpg",
      "alt": "Plain facial tissue box with a white sheet presented through its oval slit",
      "caption": "Illustrative image: Record the first-sheet condition separately from later handoffs.",
      "illustrative": true
    },
    {
      "role": "body-2",
      "url": "https://tissuepapersupplier.com/wp-content/uploads/2026/08/box-tissue-manufacturer-first-sheet-pull-03-1.jpg",
      "alt": "Three plain facial tissue boxes showing different sheet-pull outcomes",
      "caption": "Illustrative image: A comparison of pull outcomes helps define double-pull and fall-back defects.",
      "illustrative": true
    },
    {
      "role": "body-3",
      "url": "https://tissuepapersupplier.com/wp-content/uploads/2026/09/ss-11-facial-tissue-oem-artwork-ownership-body-1.webp",
      "alt": "Facial tissue box and soft pack beside loose white tissue sheets",
      "caption": "Illustrative image: Keep the box and tissue-stack revision together when approving a sample.",
      "illustrative": true
    }
  ],
  "sources": [],
  "sourceScopeNote": "",
  "conversion": {
    "heading": "",
    "nextStep": "",
    "label": "Send Your RFQ",
    "url": "https://tissuepapersupplier.com/contact-tissue-paper-supplier/"
  },
  "alternateFormats": {
    "json": "https://tissuepapersupplier.com/ai-article-packages/facial-tissue-supplier-sheet-handoff.json",
    "markdown": "https://tissuepapersupplier.com/ai-article-packages/facial-tissue-supplier-sheet-handoff.md"
  }
}
