{ "schemaVersion": "sansheng-article-data-v3", "contentPolicy": "The canonical HTML article is the source of truth. This file is generated from it and adds no independent claims or instructions.", "status": "publish", "wordpressPostId": 30182, "title": "Folded Paper Towel Supplier: How to Check Stack Skew?", "slug": "folded-paper-towel-supplier-stack-skew", "canonicalHtml": "https://tissuepapersupplier.com/folded-paper-towel-supplier-stack-skew/", "description": "Ask a folded paper towel supplier to measure stack-edge offset across packs and test loading and dispensing in the intended dispenser.", "language": "en-US", "author": { "name": "Tracy Zhang", "url": "https://tissuepapersupplier.com/tracy/" }, "publisher": { "name": "Weifang Sansheng Paper Co., Ltd.", "url": "https://tissuepapersupplier.com/" }, "dates": { "published": "2026-10-26T07:30:38Z", "modified": "2026-10-26T07:30:42Z" }, "directAnswer": "", "sections": [ { "id": "direct-answer", "heading": "Direct answer", "content": [ "A folded paper towel supplier should assess stack skew on the finished, packed towel stack, not on a few loose sheets. Measure edge offset at the top, middle and bottom after the pack is opened, then load the intended dispenser and observe feeding through a full refill cycle. A stack may look slanted yet still dispense; the buyer needs both an appearance limit and a functional result." ] }, { "id": "lock-the-towel-and-pack-format", "heading": "Lock the towel and pack format", "content": [ "Record fold type, open and folded dimensions, sheet count, pack compression, wrap and carton orientation. Select packs from different case positions and retain the approved reference. The folded paper towel supplier should not compare a loosely restacked sample with the shipping pack that dispensers actually receive." ] }, { "id": "measure-the-stack-before-reshaping-it", "heading": "Measure the stack before reshaping it", "content": [ "Place the opened stack on a flat surface in its delivered orientation. Record top-to-bottom edge offset on both long and short sides, with photographs showing a scale. Note whether offset is uniform, stepped or limited to a few sheets. Measure several packs before tapping edges square; manual straightening can hide a repeat packing problem." ] }, { "id": "observe-loading-and-dispensing", "heading": "Observe loading and dispensing", "content": [ "Load an as-received stack into the specified dispenser. Record whether it seats without forcing, whether the opening presents the first sheet, and whether skew returns during mid-stack and near-empty pulls. Keep jams, double dispensing and torn sheets as separate outcomes. A good stack dimension does not guarantee proper interfolding or feeding." ] }, { "id": "set-a-meaningful-acceptance-rule", "heading": "Set a meaningful acceptance rule", "content": [ "Agree an edge-offset range from a signed pack and an operational rule for loading and pulls. Include sample count across cartons and what happens when appearance fails but function passes. Reapprove if fold, sheet size, count, compression, wrapper or dispenser model changes. The folded paper towel supplier should provide pack and case IDs with the check." ] }, { "id": "buyer-comparison-record", "heading": "Buyer comparison record", "content": [ "Check", "Record", "Buyer purpose", "Pack", "Fold, count and compression", "Match shipped format", "Stack", "Top/middle/bottom offset", "Describe skew", "Dispenser", "Load and pull observations", "Test buyer use", "Release", "Appearance and function limits", "Avoid one-number approval" ] }, { "id": "factory-evidence", "heading": "Sansheng product evidence and its limits", "content": [ "The linked Sansheng page identifies the relevant product or material context. The reused images are illustrative product-format references, not proof of the test, certification, shipment or performance discussed here. No identified Sansheng lot record was supplied for this article. Request an exact SKU sample and its supporting record before approving an order." ] }, { "id": "what-should-buyers-ask-the-folded-paper-towel-supplier", "heading": "What should buyers ask the folded paper towel supplier?", "content": [ "Approved folded towel pack and dispenser model", "Raw edge-offset measurements and photographs", "As-received loading and pull log", "Appearance and function acceptance rules", "Send the folded paper towel supplier your intended use, destination and required acceptance decision.", "Folded Paper Towel Supplier: How to Confirm Dispenser Fit?", "Paper Towel Supplier: How to Set Retained Sample Rules?", "Paper Towel Supplier: How to Set Pallet Stack Limits?" ] }, { "id": "questions-buyers-also-ask", "heading": "Questions buyers also ask", "content": [ "No. Test the agreed appearance limit and dispenser function separately.", "No. Record the delivered condition first, then investigate whether handling changes it.", "No. Fit, alignment and dispensing are related but separate checks." ] }, { "id": "sources-and-scope-notes", "heading": "Sources and scope notes", "content": [ "Sansheng paper towels product page Supports: Identifies paper towel product context. Limit: Does not provide a stack-skew acceptance limit or dispenser result.", "Source scope checked October 26, 2026. Illustrative images do not document a Sansheng test, certified SKU or customer order." ] }, { "id": "request-an-identified-sample-review", "heading": "Request an identified sample review", "content": [ "Send the folded paper towel supplier your exact SKU, approved sample, buying destination and evidence requirement. The record can then be matched to the decision before a quote or release." ] } ], "images": [ { "role": "featured", "url": "https://tissuepapersupplier.com/wp-content/uploads/2026/08/09-folded-paper-towel-dispenser-fit-featured.jpg", "alt": "Folded paper towel supplier sample stacks on an inspection table", "caption": "Illustrative image: Folded towel sample stacks show the format that must be identified.", "illustrative": true }, { "role": "body-1", "url": "https://tissuepapersupplier.com/wp-content/uploads/2026/08/09-folded-paper-towel-dispenser-fit-comparison.jpg", "alt": "Folded white hand towel stack beside a metal ruler", "caption": "Illustrative image: A stacked pack beside a ruler supports an edge-alignment record; no result is shown.", "illustrative": true }, { "role": "body-2", "url": "https://tissuepapersupplier.com/wp-content/uploads/2026/08/09-folded-paper-towel-dispenser-fit-qc-review.jpg", "alt": "Inspector reviewing an individual folded hand towel sheet", "caption": "Illustrative image: Inspection of a towel sheet is separate from measuring the delivered stack.", "illustrative": true }, { "role": "body-3", "url": "https://tissuepapersupplier.com/wp-content/uploads/2026/08/09-folded-paper-towel-dispenser-fit-packing.jpg", "alt": "Carton of folded hand towel packs with two packs beside it", "caption": "Illustrative image: Carton-packed stacks should be sampled before their edges are straightened.", "illustrative": true } ], "sources": [], "sourceScopeNote": "", "conversion": { "heading": "", "nextStep": "", "label": "Send Your RFQ", "url": "https://tissuepapersupplier.com/contact-tissue-paper-supplier/" }, "alternateFormats": { "json": "https://tissuepapersupplier.com/ai-article-packages/folded-paper-towel-supplier-stack-skew.json", "markdown": "https://tissuepapersupplier.com/ai-article-packages/folded-paper-towel-supplier-stack-skew.md" } }