B2B procurement · Buyer guide
Compare MD and CD tensile on specimens cut from the same identified bamboo tissue SKU and conditioned and tested the same way. Ask for individual readings, specimen orientation and failure notes; report each direction separately before calculating any ratio. A directional strength result describes the sheet, not its bamboo-fiber percentage or certification.
This is a tensile comparison plan for a confirmed tissue construction. It does not verify fiber composition or report a Sansheng lot result.
Send the exact SKU, buying destination and inspection question you need reviewed.
Reusable procurement data

Direct answer
Compare MD and CD tensile on specimens cut from the same identified bamboo tissue SKU and conditioned and tested the same way. Ask for individual readings, specimen orientation and failure notes; report each direction separately before calculating any ratio. A directional strength result describes the sheet, not its bamboo-fiber percentage or certification.
Identify the actual sheet
Ask the bamboo tissue supplier to state finished product type, ply, basis weight, embossing and whether the fiber recipe is all bamboo or a blend. Label machine direction along web travel and cross direction across it. Do not compare a single ply in one direction with a converted multi-ply piece in the other.

Use one tensile procedure
Condition and cut replicate specimens from the same lot. ISO 12625-4:2022 describes a tensile test for tissue paper and products; follow its applicable specimen and test requirements. Record gauge length, width, direction and any conversion effect. If the material is not within the standard’s scope, agree a method rather than claiming standard conformance.

Read the spread and failure pattern
The bamboo tissue supplier should report individual MD and CD values, means, variation and tear location. A ratio can summarize anisotropy but should never replace the two actual strengths. Compare candidate and approved reference under the same preparation. Watch for failures at perforations, embossing or weak ply bonds before attributing the result to fiber furnish.

Set a use-based limit
Agree minimum strength in each direction for the intended converting and dispensing use. A buyer may need enough CD resistance to avoid side tears without making a perforated product hard to separate. Recheck after changes in furnish, refining, ply bonding or embossing. Fiber-origin and FSC claims require separate traceable evidence.
Buyer comparison record
| Check | Record | Buyer purpose |
|---|---|---|
| Identity | SKU, ply and furnish claim | Avoid mixing products |
| MD | Individual tensile values | Review web direction |
| CD | Individual tensile values | Review cross direction |
| Failure | Location and mode | Guide investigation |
What should buyers ask the bamboo tissue supplier?
- Confirmed bamboo tissue SKU and construction
- MD/CD sampling orientation and conditioning
- Raw tensile readings and failure photographs
- Separate direction limits and fiber-claim evidence
Send the bamboo tissue supplier your intended use, destination and required acceptance decision.
Bamboo Tissue Supplier: How to Set Batch Color Limits?
Bamboo Tissue Supplier: How to Verify Fragrance-Free Claims?
Bamboo Tissue Paper: What Evidence Should Private-Label Buyers Request for Fiber Claims?
Questions buyers also ask
Does higher MD than CD mean the sheet is defective?
Not by itself. Agree direction-specific limits for the intended use.
Does tensile prove bamboo fiber content?
No. Composition needs its own evidence and traceability.
Can one average replace individual values?
No. Variation and unusual breaks can matter to conversion and use.
Sources and scope notes
- ISO 12625-4:2022 Supports: Tensile strength method for tissue. Limit: Does not establish fiber composition or SKU pass levels.
- Sansheng bamboo tissue product page Supports: Identifies bamboo tissue product context. Limit: Does not supply this article’s tensile readings.
Source scope checked October 22, 2026. Illustrative images do not document a Sansheng test, certified SKU or customer order.
Request an identified sample review
Send the bamboo tissue supplier your exact SKU, approved sample, buying destination and evidence requirement. The record can then be matched to the decision before a quote or release.

Sales Manager at Sansheng Paper · 20+ years in tissue paper OEM & bulk export · LinkedIn






