B2B procurement · Buyer guide
A facial tissue supplier should measure the folded stack before insertion, the inside box height and the clearance in a sealed finished box. Then test first, middle and last sheets for tearing or failed handoff. Sheet count alone does not fix stack height: ply, embossing, fold and compression can change how the same count dispenses.
This is a box-fill and usability plan, not a Sansheng stack-height result. It does not replace separate carton crush, first-pull force or tissue count tests.
Send the exact SKU, buying destination and inspection question you need reviewed.
Reusable procurement data
Direct answer
A facial tissue supplier should measure the folded stack before insertion, the inside box height and the clearance in a sealed finished box. Then test first, middle and last sheets for tearing or failed handoff. Sheet count alone does not fix stack height: ply, embossing, fold and compression can change how the same count dispenses.
Measure the stack and box separately
Record sheet count, ply, folded footprint and stack height under an agreed light load. Measure the usable internal box height after board folding and window assembly. The facial tissue supplier should keep stack and box revision IDs together. A box drawing without actual folded-board dimensions may misstate the clearance available to the tissue.
Inspect compression after filling
Open sealed boxes from several cartons and compare stack height with retained loose stacks. Look for crushed top sheets, forced bulging or a large empty gap at the opening. ISO 12625-3:2014 measures tissue thickness and bulking thickness under its stated method; those readings inform construction but do not set the correct box-fill height.
Check dispensing through the box
Record first pull, several middle pulls and the final sheets using a fixed hand motion. Log torn first sheets, multiple dispensing, sheets falling back or a stack that cannot reach the opening. Repeat across boxes from different line positions. Distinguish box-fill effects from window-film edges, die-cut dust and tissue interfold design.
Set a fit window for repeat orders
Agree a target stack-height range, box internal-height tolerance and observable dispensing rule for the signed SKU. Recheck after changing sheet basis weight, ply, embossing, fold, count, board or box dimensions. Keep failed boxes with their carton and tissue lot IDs so both converting and box suppliers can investigate.
Buyer comparison record
| Check | Record | Buyer purpose |
|---|---|---|
| Stack | Height, fold and count | Know the fill volume |
| Box | Usable inside height | Know clearance |
| Condition | Bulging or loose gap | Spot fit problem |
| Dispense | First, middle, last pulls | Confirm use |
What should buyers ask the facial tissue supplier?
- Approved tissue stack and box dieline
- Stack-height and internal-height measurements
- Sealed-box sampling and dispensing log
- Target fit window and change-control rule
Send the facial tissue supplier your intended use, destination and required acceptance decision.
Box Tissue Manufacturer: How to Set First-Sheet Pull Force?
Facial Tissue Wholesale: How Can Buyers Verify Sheet Count and Pack Weight at Inspection?
Questions buyers also ask
Does the right sheet count guarantee the right fill?
No. Sheet bulk and compression can change stack height at the same count.
Is box crush the same as overfilling?
No. External pallet load and internal stack fit need separate records.
Can thickness alone approve pop-up performance?
No. Test the finished interfolded stack in the actual box.
Sources and scope notes
- ISO 12625-3:2014 Supports: Thickness and bulking thickness of tissue under defined conditions. Limit: Does not set box-fill or dispensing limits.
- Sansheng facial tissue product page Supports: Identifies boxed tissue product context. Limit: Does not provide stack-height measurements for this article.
Source scope checked October 23, 2026. Illustrative images do not document a Sansheng test, certified SKU or customer order.
Request an identified sample review
Send the facial tissue supplier your exact SKU, approved sample, buying destination and evidence requirement. The record can then be matched to the decision before a quote or release.
Sales Manager at Sansheng Paper · 20+ years in tissue paper OEM & bulk export · LinkedIn
