Blog

Sansheng Paper--Your Nearby Supplier of Household Tissue Paper

Kitchen Towel Supplier: How to Check Perforation Tear Force?

Table of Contents

B2B procurement · Buyer guide

A kitchen towel supplier should test the perforated line on production-intent rolls and compare it with the strength of the intact sheet. Measure multiple positions across the run using one defined pull direction and method, then try removing sheets by hand from the finished roll. The lab result shows line strength; the use trial reveals whether the roll unwinds or the sheet tears away from the line. Both observations belong in approval.

This guide concerns cross-direction perforations on tissue kitchen rolls. It is a buyer method, not a report of a Sansheng production test.

By Tracy Zhang · For kitchen-roll brands, distributors and importers · Prepared

Send the exact SKU, buying destination and inspection question you need reviewed.

Request a Same-Spec Review WhatsApp +86 157 6268 3071

Reusable procurement data

Kitchen towel supplier sample format: embossed roll and separate paper specimens
Illustrative image: An embossed kitchen roll shows the sheet format; tear force is not demonstrated.

Direct answer

A kitchen towel supplier should test the perforated line on production-intent rolls and compare it with the strength of the intact sheet. Measure multiple positions across the run using one defined pull direction and method, then try removing sheets by hand from the finished roll. The lab result shows line strength; the use trial reveals whether the roll unwinds or the sheet tears away from the line. Both observations belong in approval.

Separate line strength from sheet strength

A weak sheet can tear away from a well-made perforation, while an overstrong line can pull several sheets off the roll. Ask the kitchen towel supplier to report the perforated-line reading alongside intact-sheet tensile data from the same SKU. Record ply, sheet length, line pattern and test direction so later readings are comparable.

Close view of embossed kitchen paper and thin sheet edges
Illustrative image: A lifted sheet edge helps identify the sheet body and perforation zone.

Use the right perforation method

ISO 12625-12:2023 covers tensile strength of perforated lines and calculation of perforation efficiency for machine-direction testing of cross-direction perforations. Agree specimen preparation and equipment details with the laboratory rather than copying an unverified force target from another SKU. Keep the raw readings and identify the rolls and line positions sampled.

Kitchen towel specimens beside separate closed bottles of clear and yellow liquids
Illustrative image: Separate paper specimens support matched laboratory testing.

Trial finished rolls in the intended use

Hold the roll in a normal kitchen-roll holder or the buyer’s own dispenser. Pull several consecutive sheets with ordinary force, noting clean separation, unintended multi-sheet release, irregular tails and sheet-body tears. Repeat after pack opening and after an agreed handling condition. A lab strip cannot represent every winding and dispensing interaction.

Kitchen towel rolls beside a bowl and two paper specimens
Illustrative image: Finished rolls should also be pulled in a holder or use trial.

Set the approval band

Write an acceptable force range or perforation-efficiency range from the approved product and use trial. The kitchen towel supplier should record blade or perforation-wheel changes and recheck after paper, ply or sheet-length changes. Rejecting all deviations from one nominal number may ignore normal variation; accepting only an average may hide weak lines.

Buyer comparison record

CheckRecordBuyer purpose
Perforated specimenIndividual line-strength readingsQuantify separation
Intact webMatching tensile readingsSeparate sheet failure from line failure
Finished rollClean pulls and unintended releaseVerify the buyer’s use
Change recordPaper and blade settingsKnow when to requalify

What should buyers ask the kitchen towel supplier?

  • Roll format, ply, sheet length and perforation pattern
  • ISO 12625-12 method or agreed equivalent and raw results
  • Matched intact-sheet comparison
  • Finished-roll use trial and acceptance band

Send the kitchen towel supplier your intended use, destination and required acceptance decision.

Kitchen Paper Towel Manufacturer: Can Buyers Test One-Hand Tear-Off?

Kitchen Paper Towel Manufacturer: How to Prevent Dispenser Misfit

TAD Paper Supplier: How to Approve Embossing Trials?

Questions buyers also ask

Does a lower tear force always mean a better roll?

No. A line that opens too easily can release sheets unintentionally during handling.

Can the perforation test replace a use trial?

No. Roll winding and holder geometry can change how a sheet tears in use.

When should the test be repeated?

Repeat after changes to paper grade, ply, perforation tooling or sheet geometry.

Sources and scope notes

  1. ISO 12625-12:2023 Supports: Defines perforated-line tensile testing and perforation-efficiency calculation. Limit: Does not set the buyer’s acceptable force or prove a Sansheng roll result.
  2. Sansheng kitchen towel product page Supports: Identifies the relevant kitchen-roll product range. Limit: Does not provide this article’s perforation test.

Source scope checked October 22, 2026. Illustrative images do not document a Sansheng test, certified SKU or customer order.

Request an identified sample review

Send the kitchen towel supplier your exact SKU, approved sample, buying destination and evidence requirement. The record can then be matched to the decision before a quote or release.

Send Your Specification WhatsApp +86 157 6268 3071

Tracy Zhang
Tracy Zhang

Sales Manager at Sansheng Paper · 20+ years in tissue paper OEM & bulk export · LinkedIn

Facebook
Twitter
Email
Print

We will contact you within 1 working day, please pay attention to the email with the suffix “sspaperpack.com”

We will contact you within 1 working day, please pay attention to the email with the suffix “sspaperpack.com”.

Get Confirmed MOQ, FOB Price, Lead Time and Loading Estimate
tissue paper manufacturer