B2B procurement · Buyer guide
Rewinding can change measured TAD sheet thickness, but the amount and direction cannot be assumed from roll diameter alone. A TAD paper supplier should compare identified web from the parent roll and the rewound roll with the same conditioning, sampling positions and thickness method. Approve the result against the converter’s finished-product trial, not an isolated caliper number.
This guide concerns a specified TAD grade and a real rewinding path. It does not report a Sansheng trial or claim that every TAD web loses thickness.
Send the exact SKU, buying destination and inspection question you need reviewed.
Reusable procurement data

Direct answer
Rewinding can change measured TAD sheet thickness, but the amount and direction cannot be assumed from roll diameter alone. A TAD paper supplier should compare identified web from the parent roll and the rewound roll with the same conditioning, sampling positions and thickness method. Approve the result against the converter’s finished-product trial, not an isolated caliper number.
Define the before-and-after web
Record grade, basis weight, ply, embossing state, roll IDs and the exact point at which each specimen is removed. A TAD paper supplier should supply a retained parent-roll reference; the converter should collect the matching web after rewinding. Do not compare unrelated production lots or a finished embossed towel with unconverted base tissue.

Measure caliper under one stated method
Condition and handle both samples alike, then record individual thickness readings and positions across the web. ISO 12625-3:2014 specifies tissue thickness and bulking thickness measurement under its stated pressure. It is a measurement method, not a standard for acceptable rewinding loss. Keep the gauge, procedure and raw readings with the sample IDs.

Separate winding effects from other changes
Document web tension, nip or lay-on settings, roll build, elapsed storage and any embossing or lamination between samples. If the rewound web is thinner, repeat the comparison with the same settings and a controlled reference. Transport compression, humidity and an altered converting step can also affect the comparison; one end-of-roll reading cannot identify the cause.

Check the usable converted product
Run a production-intent converting trial and record finished sheet dimensions, roll or stack geometry, appearance and use performance. The purchasing decision depends on whether the delivered material still meets the signed finished-product specification. The TAD paper supplier and converter should agree which change triggers another trial before a repeat order.
Buyer comparison record
| Check | Record | Buyer purpose |
|---|---|---|
| Identity | Parent and rewound roll IDs | Match the same grade and lot |
| Measurement | Positions, conditioning and raw caliper | Compare like with like |
| Process | Tension, nip and storage record | Investigate the change |
| Output | Finished-product trial | Judge buyer use |
What should buyers ask the TAD paper supplier?
- Identified parent-roll and rewound-web specimens
- Thickness method, conditioning and raw readings
- Rewinding settings and change log
- Finished-product acceptance trial and hold rule
Send the TAD paper supplier your intended use, destination and required acceptance decision.
TAD Paper Supplier: How to Resolve Conflicting Lab Results?
Questions buyers also ask
Does a smaller rewound roll prove thickness loss?
No. Winding geometry and sheet length also matter; measure matched web specimens.
Does ISO 12625-3 set an allowable loss?
No. It defines a thickness method; the buyer and converter must agree the acceptance window.
Should the buyer accept an average only?
No. Retain individual readings and sample positions so local variation remains visible.
Sources and scope notes
- ISO 12625-3:2014 Supports: Tissue thickness and bulking thickness measurement. Limit: Does not quantify or limit rewinding effects.
- Sansheng TAD paper product page Supports: Identifies TAD paper product context. Limit: Does not provide this article’s before-and-after trial result.
Source scope checked October 26, 2026. Illustrative images do not document a Sansheng test, certified SKU or customer order.
Request an identified sample review
Send the TAD paper supplier your exact SKU, approved sample, buying destination and evidence requirement. The record can then be matched to the decision before a quote or release.

Sales Manager at Sansheng Paper · 20+ years in tissue paper OEM & bulk export · LinkedIn





