Blog

Sansheng Paper--Your Nearby Supplier of Household Tissue Paper

Paper Towel Supplier: Does Wet Tensile Hold After Storage?

Table of Contents

B2B procurement · Buyer guide

A paper towel supplier cannot show that wet strength survives storage with one fresh-sample result. Keep sealed samples from the same identified lot, agree the storage condition and duration, and test fresh and stored specimens by the same wet-tensile method. Compare the distributions and visible failure modes against a limit written into the SKU specification. A lower reading alone does not identify whether paper aging, moisture exposure or package damage caused the change.

This is an acceptance-plan example for tissue-based paper towels. It does not establish a universal shelf life or report a Sansheng lot result.

By Tracy Zhang · For commercial towel importers and private-label buyers · Prepared

Send the exact SKU, buying destination and inspection question you need reviewed.

Request a Same-Spec Review WhatsApp +86 157 6268 3071

Reusable procurement data

Paper towel supplier: folded paper towels, a towel roll and a protected sheet sample
Illustrative image: Folded and rolled paper towel formats require their own matched retained samples.

Direct answer

A paper towel supplier cannot show that wet strength survives storage with one fresh-sample result. Keep sealed samples from the same identified lot, agree the storage condition and duration, and test fresh and stored specimens by the same wet-tensile method. Compare the distributions and visible failure modes against a limit written into the SKU specification. A lower reading alone does not identify whether paper aging, moisture exposure or package damage caused the change.

Which samples should be compared?

Retain production-intent packs from one identified run. Record the SKU, ply, basis weight, pack configuration, lot code and collection point. Draw the fresh and stored specimens from matched packs, because comparing a loose laboratory sheet with an export pack changes more than storage. A paper towel supplier should preserve the unopened package and the sample chain together.

Wrapped folded-towel stack beside protected towel rolls
Illustrative image: A sealed towel pack can be stored and compared with a fresh pack from the same lot.

Define storage before measuring strength

Write down temperature, relative humidity, light exposure, package state and duration before the trial starts. Include a normal reference condition and, if relevant to the route, a separate agreed stress condition. Never call a short stress trial an actual shelf-life result without a validated relationship. ISO 12625-5:2024 specifies how wet tensile is determined after water soaking; it does not prescribe the buyer’s storage program.

Wrapped folded towels and rolls on storage shelves
Illustrative image: Packed towel stock represents the condition buyers actually receive.

What belongs in the test report?

Use the same specimen orientation, conditioning, soaking and instrument settings for both groups. Ask for individual readings, sample count, mean, spread and any torn or untestable pieces rather than a single pass label. Retest an unexpected shift with retained specimens before assigning cause. Package leakage, handling damage and paper-property change need different corrective action.

Paper towel rolls, folded samples, envelopes and a record sheet
Illustrative image: Loose sheets and packs should be identified before wet-strength testing.

Turn the result into a release rule

Agree the minimum wet-tensile requirement and any allowed change from the approved reference before seeing results. Define what happens if a stored pack fails while a fresh pack passes: isolate the affected lot, inspect packaging and repeat the matched comparison. Request the raw record for the exact SKU; a generic brochure value is not a storage claim.

Buyer comparison record

CheckRecordBuyer purpose
Sample identityLot, SKU, ply and pack conditionKeep comparisons like for like
Storage exposureCondition, duration and package stateMake the trial repeatable
Wet-tensile readingsIndividual values and failure modesSee variation, not just an average
DispositionWritten limit and retest ruleAvoid a disputed release

What should buyers ask the paper towel supplier?

  • Named SKU and retained sample from an identified lot
  • Fresh and stored pack handling and exposure record
  • Wet-tensile method, raw readings and sample count
  • Agreed acceptance limit, retest and hold rule

Send the paper towel supplier your intended use, destination and required acceptance decision.

Paper Towel Supplier: How to Set Retained Sample Rules?

Paper Towel Supplier: How to Set Pallet Stack Limits?

Folded Paper Towel Supplier: How to Confirm Dispenser Fit?

Questions buyers also ask

Does ISO 12625-5 set a shelf life?

No. It describes a wet-tensile test method; storage exposure and acceptance limits must be agreed separately.

Can two different production lots be compared?

That can confound the result. Start with matched samples from the same lot and document any additional lot comparison.

Is a single passing average enough?

Ask for individual readings and failure modes; a mean can hide weak specimens.

Sources and scope notes

  1. ISO 12625-5:2024 Supports: Defines the wet-tensile measurement after soaking. Limit: Does not establish storage life or a Sansheng acceptance limit.
  2. Sansheng paper towel product page Supports: Identifies the relevant towel product context. Limit: Does not supply this article’s retained-sample test result.

Source scope checked October 22, 2026. Illustrative images do not document a Sansheng test, certified SKU or customer order.

Request an identified sample review

Send the paper towel supplier your exact SKU, approved sample, buying destination and evidence requirement. The record can then be matched to the decision before a quote or release.

Send Your Specification WhatsApp +86 157 6268 3071

Tracy Zhang
Tracy Zhang

Sales Manager at Sansheng Paper · 20+ years in tissue paper OEM & bulk export · LinkedIn

Facebook
Twitter
Email
Print

We will contact you within 1 working day, please pay attention to the email with the suffix “sspaperpack.com”

We will contact you within 1 working day, please pay attention to the email with the suffix “sspaperpack.com”.

Get Confirmed MOQ, FOB Price, Lead Time and Loading Estimate
tissue paper manufacturer