Blog

Sansheng Paper--Your Nearby Supplier of Household Tissue Paper

Paper Towel Supplier: Does Case Opening Damage Packs?

Table of Contents

B2B procurement · Buyer guide

Case opening can damage the first towel packs when the cut line, top clearance and inner-pack position are poorly matched. Ask the paper towel supplier for a production-intent filled case and open it with the buyer’s normal tool. Count damaged packs and record whether the issue comes from the cutter path, carton flaps or tight packing.

This is an opening-method comparison, not a claim that Sansheng cases produce a particular damage rate.

By Tracy Zhang · For janitorial and foodservice distributors opening bulk towel cases · Prepared

Send the exact SKU, buying destination and inspection question you need reviewed.

Request a Same-Spec Review WhatsApp +86 157 6268 3071

Reusable procurement data

Paper towel supplier open cases with folded and rolled towel packs
Illustrative image: Two case layouts show how pack position changes the first cut risk. Product context only; no Sansheng lot test is shown.

Direct answer

Case opening can damage the first towel packs when the cut line, top clearance and inner-pack position are poorly matched. Ask the paper towel supplier for a production-intent filled case and open it with the buyer’s normal tool. Count damaged packs and record whether the issue comes from the cutter path, carton flaps or tight packing.

Record how staff actually open cases

Observe whether the branch uses a safety cutter, blade or tear strip. Note where the cut starts and which cartons are opened while stacked. A tidy empty carton is not an adequate test; use the filled case. Identify the first pack beneath each top flap and whether a separator creates clearance. Keep towel format, pack size and case count fixed for the comparison.

Paper towel supplier mixed pallet with folded towel cases and roll cases
Illustrative image: Bulk towel cases show the shipping unit being opened. Product context only; no Sansheng lot test is shown.

Make the first opening repeatable

Open several production-intent cases with the usual method. Record the case orientation, cutter depth, film or tissue damage and any flaps that snag packs during removal. Inspect the first pack as well as those lower in the case. Keep damaged film separate from damaged paper; the acceptance and repacking choices differ. Photograph the case before and immediately after opening.

Wrapped paper towel pallet of plain shipping cartons
Illustrative image: Open pallet cases provide context for receiving and picking. Product context only; no Sansheng lot test is shown.

Compare a feasible case change

Trial a clearer cut line, more top clearance, an inner pad or a different pack orientation as appropriate. Each can change carton size, board use and pallet count. Compare accepted packs per case and the time needed to open and pick them. The paper towel supplier should quote a realistic filled-case design; a protection feature is worthwhile only if it improves the buyer’s route enough to justify its cost.

Wrapped folded paper towels beside roll towels
Illustrative image: Wrapped folded towels show the inner pack that may be cut. Product context only; no Sansheng lot test is shown.

Carry the approved method into receiving

Save the approved case drawing, pack orientation, opening instruction and damaged-pack definition. Train receiving teams on the chosen cut path and keep an identified sample case. Recheck after a change to pack height, fold format or case board, because the clearance may no longer match. If the damage happens after opening, investigate later picking separately.

Buyer comparison record

RecordBuyer decision
Filled case, pack orientation and opening toolDefine the sample
Top clearance and first-pack conditionRun the comparison
Damaged film versus damaged paper countsReview the result
Approved cut path and case revisionApprove the reorder rule

What should buyers ask the paper towel supplier?

  • Filled case, pack orientation and opening tool
  • Top clearance and first-pack condition
  • Damaged film versus damaged paper counts
  • Approved cut path and case revision

Send the paper towel supplier your intended use, destination and acceptance rule. Ask the supplier to mark each field confirmed, conditional or unavailable in the quote.

Paper Towel Supplier: How to Verify Case Counts?

Paper Towel Supplier: How to Set Pallet Stack Limits?

Questions buyers also ask

Can a case count check reveal cutter damage?

No. Open the filled case and inspect the first packs.

Will a thicker carton solve the problem?

Not necessarily. The cutter path and top clearance may matter more.

Should buyers record film and paper damage separately?

Yes. They lead to different acceptance decisions.

Sources and scope notes

  1. Sansheng paper towels product page Supports: Identifies the relevant product family and supply context. Limit: Does not establish an identified batch result, test pass or buyer-specific pack configuration.

Source scope checked November 18, 2026. Buyer checks above are proposed methods; acceptance criteria must be agreed for the exact SKU and use.

Request an identified sample review

Send the paper towel supplier your exact SKU, intended use, destination and required evidence. Compare the available record with your buying decision before approving a quote or reorder.

Send Your Specification WhatsApp +86 157 6268 3071

Tracy Zhang
Tracy Zhang

Sales Manager at Sansheng Paper · 20+ years in tissue paper OEM & bulk export · LinkedIn

Facebook
Twitter
Email
Print

We will contact you within 1 working day, please pay attention to the email with the suffix “sspaperpack.com”

We will contact you within 1 working day, please pay attention to the email with the suffix “sspaperpack.com”.

Get Confirmed MOQ, FOB Price, Lead Time and Loading Estimate
tissue paper manufacturer