B2B procurement · Buyer guide
Case opening can damage the first towel packs when the cut line, top clearance and inner-pack position are poorly matched. Ask the paper towel supplier for a production-intent filled case and open it with the buyer’s normal tool. Count damaged packs and record whether the issue comes from the cutter path, carton flaps or tight packing.
This is an opening-method comparison, not a claim that Sansheng cases produce a particular damage rate.
Send the exact SKU, buying destination and inspection question you need reviewed.
Reusable procurement data

Direct answer
Case opening can damage the first towel packs when the cut line, top clearance and inner-pack position are poorly matched. Ask the paper towel supplier for a production-intent filled case and open it with the buyer’s normal tool. Count damaged packs and record whether the issue comes from the cutter path, carton flaps or tight packing.
Record how staff actually open cases
Observe whether the branch uses a safety cutter, blade or tear strip. Note where the cut starts and which cartons are opened while stacked. A tidy empty carton is not an adequate test; use the filled case. Identify the first pack beneath each top flap and whether a separator creates clearance. Keep towel format, pack size and case count fixed for the comparison.

Make the first opening repeatable
Open several production-intent cases with the usual method. Record the case orientation, cutter depth, film or tissue damage and any flaps that snag packs during removal. Inspect the first pack as well as those lower in the case. Keep damaged film separate from damaged paper; the acceptance and repacking choices differ. Photograph the case before and immediately after opening.

Compare a feasible case change
Trial a clearer cut line, more top clearance, an inner pad or a different pack orientation as appropriate. Each can change carton size, board use and pallet count. Compare accepted packs per case and the time needed to open and pick them. The paper towel supplier should quote a realistic filled-case design; a protection feature is worthwhile only if it improves the buyer’s route enough to justify its cost.

Carry the approved method into receiving
Save the approved case drawing, pack orientation, opening instruction and damaged-pack definition. Train receiving teams on the chosen cut path and keep an identified sample case. Recheck after a change to pack height, fold format or case board, because the clearance may no longer match. If the damage happens after opening, investigate later picking separately.
Buyer comparison record
| Record | Buyer decision |
|---|---|
| Filled case, pack orientation and opening tool | Define the sample |
| Top clearance and first-pack condition | Run the comparison |
| Damaged film versus damaged paper counts | Review the result |
| Approved cut path and case revision | Approve the reorder rule |
What should buyers ask the paper towel supplier?
- Filled case, pack orientation and opening tool
- Top clearance and first-pack condition
- Damaged film versus damaged paper counts
- Approved cut path and case revision
Send the paper towel supplier your intended use, destination and acceptance rule. Ask the supplier to mark each field confirmed, conditional or unavailable in the quote.
Questions buyers also ask
Can a case count check reveal cutter damage?
No. Open the filled case and inspect the first packs.
Will a thicker carton solve the problem?
Not necessarily. The cutter path and top clearance may matter more.
Should buyers record film and paper damage separately?
Yes. They lead to different acceptance decisions.
Sources and scope notes
- Sansheng paper towels product page Supports: Identifies the relevant product family and supply context. Limit: Does not establish an identified batch result, test pass or buyer-specific pack configuration.
Source scope checked November 18, 2026. Buyer checks above are proposed methods; acceptance criteria must be agreed for the exact SKU and use.
Request an identified sample review
Send the paper towel supplier your exact SKU, intended use, destination and required evidence. Compare the available record with your buying decision before approving a quote or reorder.

Sales Manager at Sansheng Paper · 20+ years in tissue paper OEM & bulk export · LinkedIn




